....MESH Topology & TREE Topology....

MESH Topology

A mesh network is a local area network (LAN) that employs one of two connection arrangements, full mesh topology or partial mesh topology. In the full mesh topology, each node (workstation or other device) is connected directly to each of the others. In the partial mesh topology, some nodes are connected to all the others, but some of the nodes are connected only to those other nodes with which they exchange the most data.

A mesh network is reliable and offers redundancy. If one node can no longer operate, all the rest can still communicate with each other, directly or through one or more intermediate nodes. Mesh networks work well when the nodes are located at scattered points that do not lie near a common line.

The chief drawback of the mesh topology is expense, because of the large number of cables and connections required. In some scenarios, a ring network or star network may prove more cost effective than a mesh network. If all the nodes lie near a common line, the bus network topology is often the best alternative in terms of cost.

TREE Topology

is a combination of the bus and the Star Topology. The tree like structure allows you to have many servers on the network and you can branch out the network in many ways. This is particularly helpful for colleges, universities and schools so that each of the branches can identify the relevant systems in their own network and yet connect to the big network in some way.

A Tree Structure suits best when the network is widely spread and vastly divided into many branches. Like any other topologies, the Tree Topology has its advantages and disadvantages. A Tree Network may not suit small networks and it may be a waste of cable to use it for small networks. Tree Topology has some limitations and the configuration should suit those limitations.

The Tree Topology follows a hierarchical pattern where each level is connected to the next higher level in a symmetrical pattern. Each level in the hierarchy follows a certain pattern in connecting the nodes. Like the top most level might have only one node or two nodes and the following level in the hierarchy might have few more nodes which work on the point to point connectivity and the third level also has asymmetrical node to node pattern and each of these levels are connected to the root level in the hierarchy. Think of a tree that branches out in various directions and all these branches need the roots and the tree trunk to survive. A Tree Structured network is very similar to this and that is why it is called the Tree Topology.

...chan...